Support Ticket
Fireray 3000 smoke detector logo

Fireray® 3000

INFRARED BEAM SMOKE DETECTION FOR LARGE & OPEN SPACES

The Fireray® 3000 End to End Infra-red Optical Beam Smoke Detector (OBSD) has been designed using the latest optical technology, incorporating modern industrial, electronic and software techniques. This detector offers cost effective protection of large, open area spaces with high ceilings. It is also very suited to applications where access to ceiling mounted smoke detectors presents practical difficulties. 

The Fireray® 3000 is ideal for applications where line of sight for the IR (infra-red) detection path is narrow and where the building structure uses reflective surfaces. It has also been designed to be aesthetically pleasing and thus can equally suit modern architectural buildings as well as historical sites, particularly where ornate ceilings exist.

The Fireray® 3000 Exd is ideally suited for the protection of large areas, with potentially explosive atmospheres, against smoking fires. Fireray® 3000 Exd comprises an infrared transmitter and a receiver, both of which are ATEX-certified for use in Group 2 hazardous areas. There is a separate, safe area, wall-mounted remote/low level control unit to allow adjustment and testing from a convenient non-hazardous location. The product is designed for large enclosures within oil rigs, refineries, ordnance stores and similar premises.

PRODUCT FEATURES
  • Patented Light Cancellation Technology (LCT) – Cancels unwanted light, including sunlight, sodium lamps, and fluorescent lighting.
  • Separate Transmitter and Receiver Heads – Flexible installation for any layout.
  • Wide Detection Range – 16.5 to 393 feet, configurable per detector set.
  • Integral Laser Alignment – Built-in laser pointer for precise setup.
  • 2-Wire Controller Interface – Simplified connection between controller and receiver.
  • Single and Twin Channel Support – One or two detector sets per system.
  • Separate Fire and Fault Relays – Independent signaling for alarms and faults.
  • Low-Level Controller with LCD – Easy control and monitoring.
  • Programmable Sensitivity & Thresholds – Customize alarm settings.
  • Automatic Gain Control (AGC) – Compensates for signal drift from dirt or aging.
  • Built-In UL/ULC Fire Test – Internal electronic obscuration verification.
  • Easy Installation – Knockouts for fast wiring.
  • Optional Transmitter Powering – Powered directly from the controller if needed.

Electrical

  • Operating Range: 16.5–393 ft (5–120 m)
  • Operating Voltage Range: 12–36V DC ±10%
  • Operating Controller Current (with 1 or 2 Receivers): 14 mA (constant)
  • Operating Transmitter Current: 8 mA (per Transmitter)
  • Power Down Reset Time:  > 20 seconds
  • Fire and Fault Relay Contacts: Resistive VFCO 2A @ 30 Volts DC
  • Optical Wavelength: 850 nm
  • LED Indications: Red = Fire; Amber = Fault; Green = System OK


Environmental

  • IP Rating: IP54
  • Operating Temp. (non-condensing): UL – -4°F to +131°F (-20°C to +55°C)
  • Relative Humidity (non-condensing): 93%
  • Cabling between each Receiver and Controller: 18-14 AWG 1-Pair Twisted, Jacketed
  • Maximum Cable Distance between Receiver & Controller: 330 Feet (100m)


Mechanical

  • Control Unit: 7.99 x 4.88 x 2.81 in,  1.34 lb
  • Transmitter & Receiver: 3.07 x 3.03 x 6.33 in, 0.456 lb
  • Housing Material (Transmitter/Receiver/Controller): UL94 V2 PC
  • Airports & Aircraft Hangars
  • Warehouse & Storage Facilities
  • Manufacturing & Food Processing
  • Diesel Generators & Fuel Storage
  • Battery Rooms & Charging Facilities
  • Oil & Gas Facilities
  • Refineries & Cogeneration Plants
  • Chemical & Hydrogen Plants
  • Tank Farms
  • Compressor Stations
  • Paint Booths
  • Paint & Solvent Storage Facilities
  • Recycling Centers
  • LPG / LNG Facilities
  • Power Plants
  • Marine Fuel Loading & Unloading
  • 3000-103: Fireray® 3000 End to End beam smoke detector 16.5ft. to 393ft. (5m to 120m). System includes I x Transmitter, I x Receiver and I x System Control Unit.
  • 3000-016: Additional Detector Pack (set of Transmitter and Receiver heads). Use up to I additional Detector Pack per 3000-103.
  • 1170-000: Fireray® 3000 Adjustment Bracket
  • 3000-202: Fireray® 3000 Surface Mount Adaptor
  • 3000-203: Fireray® 3000 4” Square Cover Plate
  • 5000-0 I I: Fireray® 3000 Surface Mount Detector Back Box (Requires one 3000-202 Surface Mount Adaptor for each head – ordered separately).
  • 3000-209: Fireray® 3000 Controller Back Box
  • 3000-210: Fireray® 3000 Semi Flush Trim Plate
  • I 130-000: Wire Cage for Fireray® 3000 when used with the 5000-0 I I Detector Back Box and 3000-202 (ordered separately).

  • UL – S3417

  • ULC – S3417

  • CSFM – 7260-1508-105

  • Maryland – 2243

Visit www.ffeus.com for up to date listings information.

Request Fireray 3000 Pricing / Availability

Looking for dependable gas detection and control solutions at the right price, without the long wait? Conspec offers industry-leading turnaround times and competitive pricing on all of our safety solutions. Please share some information about your project and a member of our team will respond at their earliest convenience.

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Additional Resources

Photos / Media