Fixed point gas detection for improved life safety. toxic and combustible gas. critical building systems. facility compliance.
Learn more about Mechanical & Boiler Rooms in our application guide.
Learn more about Mechanical & Boiler Rooms in our application guide.
Need Help? Contact our Support Team
Mechanical and boiler rooms contain critical building systems which can produce hazardous toxic or combustible gas such as methane (CH4), propane (C3H8), carbon monoxide (CO), and nitrogen dioxide (NO2).
Fuel-fired equipment, refrigeration systems, generators, compressors, and other building systems each has the potential to introduce different hazards into building spaces. Refrigerant leaks, for example, can create toxic, asphyxiation, or flammability hazards, while fuel-fired equipment can introduce combustible gases and toxic combustion products. A leak, equipment malfunction, incomplete combustion, or ventilation failure can quickly transform a routine mechanical room problem into a serious threat to employees and other building occupants, making continuous gas detection an important part of facility safety
An effective gas detection system should be engineered around the specific conditions of a facility to accurately identify gas leaks, incomplete combustion, refrigerant leaks, or equipment malfunctions before they become emergencies. Gas densities, accumulation locations, ventilation, and detection placement must all be considered when designing an effective life safety system.
Conspec knows gas detection is a critical first step in facility safety, which is why we partner with facility managers and engineering teams to configure an integrated gas detection solution that is the right fit for the facility.
Flexible, scalable gas monitoring helps detect hazardous conditions early and provides real-time information for building safety and automated response.
Detect the toxic or combustible gases produced by your equipment and fuel sources with single-, dual-, or multi-gas configurations.
Place sensors where gas is most likely to accumulate, including remote locations and multiple elevations to account for gas behavior and facility geometry.
Connect gas detection to ventilation, alarms, and building automation systems for automatic response to changing gas concentrations.
Detect the toxic or combustible gases produced by your equipment and fuel sources with single-, dual-, or multi-gas configurations.
Place sensors where gas is most likely to accumulate, including remote locations and multiple elevations to account for gas behavior and facility geometry.
Connect gas detection to ventilation, alarms, and building automation systems for automatic response to changing gas concentrations.
Want to learn more? Download our Mechanical & Boiler Rooms application guide.
Configurable gas detection allows facilities to match monitoring coverage to their specific hazards, equipment, and layout. Remote sensors, multi-gas monitoring, and flexible communication options provide the coverage and system integration needed for both small mechanical rooms and complex facilities.
Conspec remote sensors can monitor hazards at potential release points, accumulation areas, multiple elevations, and adjacent spaces, allowing one system to provide real-time coverage across complex facility layouts.
Conspec detection systems provide continuous monitoring with outputs for alarms, ventilation, equipment controls, remote notification, and building systems, helping facilities detect changing conditions and act before hazards escalate.
Conspec solutions scale from focused single- and two-gas applications to multi-gas systems with distributed remote sensors, allowing detection coverage to expand with facility size, hazards, and operational requirements.
Gas, flame, and heat detection can integrate with existing facility infrastructure through flexible communication options. Centralized monitoring supports connections to SCADA, PLC, and BMS/BAS systems across small and large commercial facilities.
Explore our integrated gas monitoring, flame detection, thermal imaging, and network control solutions designed to support life safety, facility awareness, and operational reliability.
Gas sensors should be installed depends on gas behavior, potential release points, room geometry, ventilation, and equipment layout. Place remote sensors where gas is most likely to accumulate, including potential release points, adjacent spaces, or elevations based on gas behavior. Learn more about gas sensor placement.
Yes, with distributed remote sensors. Our Optio multi-gas monitors can provide coverage across multiple potential release points, accumulation areas, elevations, and adjacent spaces, extending detection across complex facility layouts without requiring a separate monitor for every location or hazard.
Yes. Conspec gas detection systems can connect to ventilation, alarms, equipment controls, and building automation systems to support automatic response to changing gas concentrations. Our Primus V offers expanded control solutions for more complex operations.
The gases that should be monitored depend on the facility’s equipment, fuel sources, refrigerants, or stored gases within the facility. Common hazards include methane (CH4), propane (C3H8), carbon monoxide (CO), nitrogen dioxide (NO2), and ammonia (NH3).
Every facility faces unique challenges depending on equipment, local regulations, geometry, and building size. Our team is ready to help you design a solution tailored to your critical systems and the hazards they can create.
Complete the form below and a mechanical and boiler room specialist will be in touch to discuss your application and requirements. We look forward to working together!
