Conspec’s P1879 Series Calibration Kits are designed to keep all the necessary equipment need to calibrate our Conspec gas detectors in one easy to use carry case.
Conspec Controls calibration gas kits include:
Inquire with Conspec representatives to order a calibration kit or replacement gas cylinders for your specific needs.
| P1879-C2H40 | Ethylene Oxide Calibration Kit |
| P1879-C3H8 | Propane Calibration Kit |
| P1879-C4H8 | Isobutylene Calibration Kit |
| P1879-CH4 | Methane Calibration Kit |
| P1879-CH4-2.5% | 2.5% Methane Scaled Gas Calibration Kit |
| P1879-Cl2 | Chlorine Calibration Kit |
| P1879-CO | Carbon Monoxide Calibration Kit |
| P1879-CO/N | Carbon Monoxide 250 ppm / Nitrogen Dioxide 10 ppm Calibration Kit |
| P1879-CO/VC | Carbon Monoxide Calibration Kit with Programmer |
| P1879-CO2 | Carbon Dioxide Calibration Kit |
| P1879-CO2-3%-XP | 3% Carbon Dioxide Scaled Gas, Nitrogen (Zero), and XP Cal Fitting |
| P1879-CO-250 | Carbon Monoxide 250 ppm Calibration Kit |
| P1879-CO-XX | Carbon Monoxide Calibration Kit |
| P1879-CO2-XX | Carbon Dioxide Calibration Kit |
| P1879-H2 | Hydrogen Calibration Kit |
| P1879-H2-XX | Hydrogen Calibration Kit |
| P1879-H2S | Hydrogen Sulfide Calibration Kit |
| P1879-HCl | Hydrogen Chloride Calibration Kit |
| P1879-NO2 | Nitrogen Dioxide Calibration Kit |
| P1879-N2 | Nitrogen Calibration Kit |
| P1879-NH3 | Ammonia Calibration Kit |
| P1879-NH3-XX | Ammonia Calibration Kit |
| P1879-NO | Nitric Oxide Calibration Kit |
| P1879-NO-50 | Nitric Oxide 50 ppm Calibration Kit |
| P1879-NO2 | Nitrogen Dioxide Calibration Kit |
| P1879-O2 | Oxygen Calibration Kit |
| P1879-O2-XX | Oxygen Calibration Kit |
| P1879-SO2 | Sulfur Dioxide Calibration Kit |
| P1879-Z | Zero Air Calibration Gas Calibration Kit |
| P1882 | 0.5 LPM Regulator |
| P1882-1 | 1.0 LPM Regulator (specified flow-rate for CH4, H2, NO2, Cl2 |
| P1883 | 574-2-1670 Calibration Kit Cylinder Case |
| P1883-A | Soft Carry Case for 3 Cylinders |
| P1883-B | Hard Carry Case for 3 Cylinders |
| P1883-T | 3/16″ ID x 5/16″ OD PVC Tubing |
| P2580-8 | Dust Cap |
| P3013 | Calibration Adaptor for Standard NEMA 4 Sensors |
| P3013-1 | P3013 Calibration Adaptor with 4′ 3/16″ ID x 5/16″ OD |
| P3013-E | Calibration Adaptor for P2458 Combustible Sensor |
| P3013-FTA | Flow-Through Calibration Adaptor for Standard NEMA 4 Sensors |
| P3013-FTA/C | Flow-Through Calibration Adaptor for P2580-2 Combustible Sensors |
| P3013-FTA/S | Short Flow-Through Calibration Adaptor for Standard NEMA 4 Sensors |
| P3013-FTA/T | Flow-Through Calibration Adaptor for NEMA 4 Housing |
| P3013-I | 1/8″ NPT Brass Calibration Adaptor for P1246 Combustible Gas Sensor |
| P3013-N/C | Calibration Adaptor for P2580-2 Combustible Gas Sensor |
| P3013-N/C-1 | Nemoto Combustible Cap with 1/8″ Brass & Open Bottom |
| P3013-N/T | Calibration Adaptor for XP 7-Series Sensor Housing |
| P3013-SH | Calibration Adaptor for Smart Head Sensors |
| Dimensions | 21 × 14 × 5 in (533 × 356 × 127 mm) |
| Weight | 15 lb (6.80 kg |
Looking for dependable gas detection and control solutions at the right price, without the long wait? Conspec offers industry-leading turnaround times and competitive pricing on all of our safety solutions. Please share some information about your project and a member of our team will respond at their earliest convenience.
"*" indicates required fields
