The D1xCP1-PS dual action model features a “PUSH” bar that moves inward, allowing the “PULL” handle to be grasped and operated by a single hand. The activated station is reset by opening the station with a key, placing the handle in the normal upright position, and re-locking the station.
Explosion Hazard Classifications Class I, Div. 1, Group B, C and D Class II, Div. 1, Group E, F and G Class III, Div. 1 (FM)
Marine and NEMA type 4X Rated
DPDT switch with screw terminal connection
Dual Action
DC and AC Voltage Contact Ratings
Key Reset
Listings: UL, MEA
Temperature: -40°C to +65°C [-40° to 150°F]
Relative humidity: 95% at 20°C [68°F]
Switch Type: Double Pole, Double Throw (DPDT)
Switch Rating: 1 Amp @ 30 VDC
10 Amp @ 120 VAC
IP Rating: NEMA Type 4X (UL)
Other: UL Marine Listed
Pull Station Weight: 4.8 lbs
Pull Station Dimensions: 6 5/16”h x 3 1/4”w x 3 7/8”d
Conduit Fittings: Two – 3/4” – 14 NPT
Colour: Red with raised white letters
white “PULL” bar and white “PUSH” bar
(Dual Action) with raised red letters
Version: Part code:
Product type: D1XCP1PS D1xCP1-PS Manual Pull Station
Switch Type: [s] D DPDT/DPCO
Cable entries: [e] D 2 × 3/4″ NPT
Stopping plug: [m] X
N None (default)
1 x Nickel Plated Brass
Duty label / Equipment tag: [d]: 1
2
3
6
7 No Duty label, no Equip. tag
Duty label Stainless Steel
Duty label St/St + Equip. tag
Equip. tag only
Special label requirement
Version: [v] A1 UL
Enclosure colour: [x] R Red
Full code: D1XCP1PSDDX1A1R
UL
MEA
